-40%
Original Delft Clay Casting Sand Gold Silver Pewter Aluminum Made in Netherlands
Original Delft Clay Casting Sand Gold Silver Pewter Aluminum Made in Netherlands
Original Delft Clay Casting Sand Gold Silver Pewter Aluminum Made in Netherlands

Original Delft Clay Casting Sand Gold Silver Pewter Aluminum Made in Netherlands

$ 34.82

Availability: 60 in stock
  • Country/Region of Manufacture: Netherlands
  • Condition: New
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money back or replacement (buyer's choice)
  • California Prop 65 Warning: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/
  • Return shipping will be paid by: Seller
  • Brand: Delft

    Description

    Delft Clay Casting Sand
    2 KILO Bag  (4.4 Lbs.)
    The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. Reproduce your original models quickly with this unique Delft™ clay casting system.
    Keep the traditional techniques of sand casting alive and well with this re-usable, ultra-fine Dutch clay mix.
    The process was invented by Hans Karreman, a Dutch goldsmith. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc.
    Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used. Since this is a cold-molding process, molds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. Because this is a type of sand casting, it is best suited to producing castings without pronounced undercuts.
    SPECIFICATIONS:
    JETS INC. Product # 0305-3002
    -
    - Delft Clay 2 Klio (4.4 lbs.)
    -
    - Country of Origin: Netherlands (Holland)
    INSTRUCTIONS
    :
    Delft Clay mold is created in these steps:
    1. Fill and compact the Clay into one half of the frame
    2. Remove excess clay with a straight edge (e.g. a flexible steel ruler)
    3. Press your original pattern halfway into the clay.
    4. Brush Mica Powder or talcum powder over this surface of the mold
    5. Install the other half of the frame, fill with clay and compact
    6. Open the ring frame and remove the pattern
    7. Carve out a pouring channel and vents
    8. Pour in molten metal The Delft Clay Casting
    Shipping: Via USPS Priority Mail
    Note: Visit
    JETSTOOLS
    our ebay store to see a line of Lost Wax Casting Supplies including Casting Powders, Waxes, Mold Rubber and supplies along with a line of
    J
    ewelers
    E
    quipment
    T
    ools and
    S
    upplies.
    JETSINC.
    5Lb (PP) 5l 619
    CPSK   M  P